メッセージを送る
プロダクト
私達について
工場旅行
品質管理
私達に連絡しなさい
見積依頼
ニュース
guangqing(anhui)gas technologies co.,ltd.
ホーム 製品IMPCOの修理用キット

空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット

中国 guangqing(anhui)gas technologies co.,ltd. 認証
中国 guangqing(anhui)gas technologies co.,ltd. 認証
オンラインです

空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット

Air Valve RKCA55 Standard Carburetor IMPCO Repair Kits
Air Valve RKCA55 Standard Carburetor IMPCO Repair Kits

大画像 :  空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット

商品の詳細:
起源の場所: 米国
ブランド名: IMPCO
モデル番号: RK-COBRA
お支払配送条件:
最小注文数量: 24
価格: Depending on quantity
パッケージの詳細: カートン
受渡し時間: 8週
支払条件: T/T
供給の能力: 8weeksごとの1200pcs
詳細製品概要
製品名: 修理用キット 部品番号: RK-CA55
ブランド: IMPCO エア燃料の比率: 標準
ハイライト:

RKCA55標準的なキャブレターの改造のキット

,

RKCA55 IMPCOの修理用キット

,

キャブレターIMPCOの修理用キット

IMPCO RK-CA55 , Model CA55 Carburetor Repair Kit , Standard Air Valve
 
CA55 Standard Carburetor/MixerREPAIR KIT INSTRUCTIONS
Important: Any maintenance, service or repair should be performed by trained and experienced service technicians. Proper tools and equipment should be used to prevent injury to the servicing technician, property or system components. Service repairs should always be performed in a safe environment and the technician should always wear protective clothing to prevent injury.
The IMPCO PPI-55 repair kit instructions will provide the technician information to successfully repair the CA55 Carburetor. Always inspect the major casting pieces for damage, corrosion or cracks before attempting a service repair. Be sure the repair kit part number you are using is correct for the carburetor/mixer being serviced.
 
REBUILD INSTRUCTIONS Disassembly
 
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 0
1. Remove the carburetor from the engine, then remove 4 screws (Sl-3) holding throttle body to mixer bowl.
 
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 1
2. Remove the throttle body. Note that the gasket retains idle cutoff piston in place (shown under finger tip).
Note: Not all 55 Series Carburetors are equipped with the cutoff piston.
 
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 2
3. Remove the gasket which will release the Idle cutoff piston and spring.
 
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 3
 
4. Remove the check valve plate and air valve spring. Lift the air/gas valve from mixer bowl.
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 4
 
5. Clean the mixer bowl assembly in safety solvent. Do not use carburetor cleaner as it will attack synthetic rubber seals.
 
 

Reassembly

空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 5

1. The RK-CA55 kit includes:
• AV1-14925 Air/Gas Valve Assy (RK-55-2 kit supplies the AV1-14926 “lean” valve.)
• AP2-14700 Plate, Check Valve Assy
• P4-1 Piston, Idle Cutoff
• S2-44 Spring, Idle Cutoff
• S1-3 Screws (4), 10-24 x 5/8”
• G1-92 Gasket
• PPI-55 Repair Kit Instructions
 
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 6
2. Place the air/gas valve assembly in the mixer bowl.
 
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 7
3. Place the air/valve spring and check valve plate in the mixer bowl.
 
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 8
4. This illustration shows the mixer bowl assembled with the check valve assembly centered towards air horn. The idle cutoff piston and spring are shown in place ready for assembly to the mixer bowl.
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 9
5.Place the gasket on the throttle body retainingthe idle cutoff piston in its recess (under thumb,as shown in the illustration).
 
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 10
6.While holding the gasket and idle cutoff pistonin place, turn the throttle body over. Note cutoutof the gasket designed to clear the check valveassembly on plate.
 
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 11
7.Lower the throttle body gently onto the mixerbowl making sure idle cutoff piston does notescape from its recess. Once the throttle body isflush on the mixer bowl, align the holes and startthe 4 screws.
 
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 12
8.Tighten 4 screws to 30 in lbs (3.4 N•m)
空気弁RKCA55の標準的なキャブレターIMPCOの修理用キット 13

連絡先の詳細
guangqing(anhui)gas technologies co.,ltd.

コンタクトパーソン: Mrs. Carrie Liu

電話番号: +86 13855195806

ファックス: 86-551-63664756

私達に直接お問い合わせを送信 (0 / 3000)